Holders MEGA
Max. 80'000 rpm
Clamping rang: ∅ 0.45 - 3.25
0.1 mm increments for higher precision
Incl. nut MGN3S
MEGA wrench for collet chuck
For MEGA Micro Chuck
Ød : 10
Nut MEGA
D=10 / ØD1=10.3 / L= 13.00 / L1=11.0
[Non binding pictures]
Collet MEGA
Compatible Holders MEGA
HMI Micro5 Standalone
The standalone interface consists of a 13" touchscreen attached directly to the front of the Micro5 on a swivel joint.
This variant has a small footprint and allows the space occupied by the Micro5 to be optimised.
Colletholder for micro machining ATC-E 15 / SR 6 x 022 with clamping nut, balanced to 80'000 min-1 REGO-FIX
REGO-FIX Colletholder for micro machining with clamping nut, balanced to 80'000 min-1
ATC-E 15 / SR 6 x 022
Draft palett Micro5
Base palett to process under desired geometry
Unhardened steel
Clamping nut ER 11 MS Mini high-speed REGO-FIX
REGO-FIX Clamping nut Mini high-speed
ER 11 MS
Clamping nut ER 8 MS Mini high-speed REGO-FIX
REGO-FIX Clamping nut Mini high-speed
ER 8 MS
Clamping nut SRMS 6 Mini high-speed REGO-FIX
REGO-FIX Clamping nut Mini high-speed
SRMS 6
Ergonomic and customizable Workbench
3 drawers
MDF desk surface with 8 blocks (2x cableguide, preparation for display support (2 blocks) and 4x free blocks)
Collet ER 11-UP / ultra-precision REGO-FIX
REGO-FIX Collet ER-UP / ultra-precision
Collet ER 8-UP / ultra-precision REGO-FIX
REGO-FIX Collet ER-UP / ultra-precision
ER 8-UP
Micro-bore collet ER 8-MB REGO-FIX
REGO-FIX Micro-bore collet
ER 8-MB
Spindle 60'000t/min ⌀35mm
- Diameter: ⌀35mm
- Speed: 12'000 - 60'000 rpm
- Nominal torque: 3.8 Ncm (4.8 Ncm peak*)

Compatible with Micro5 up to SN/002024